DIY rocking chair

A rocking chair is usually associated with home comfort, peace and peaceful relaxation. Indeed, the rhythmic movements from the swaying chair perfectly soothe, help to relax from physical and mental stress. For this reason, such a piece of furniture can be found not only in a country house or in the country, but also in the relaxation room of a solid office. The topic of today's article: do-it-yourself rocking chair.

to contents ↑

Most Popular Materials

Of course, most often you can find such furniture in the country. The most common materials for the manufacture of such products are:

• rattan (natural or artificial);
• vine;
• metal (forging).

Their main advantages:

• Aesthetic appearance.
• Resistant to moisture and sun.
• Q factor.
• Long service life.

Ideal if the furniture fits organically into the surrounding landscape:

• If, for example, the buildings are made of timber, country cottages made of twigs or rattan will look good.
• If the house is stone, it is advisable to give preference to metal products - forged or obtained by cold bending.

Important! Interesting design decisions - a rocking chair for two or a product with a reclined back (an alternative to the usual deck chair).

Consider the materials for the manufacture of such chairs in more detail.

DIY rocking chair made of wood

It is equally suitable for products of classic and avant-garde style. It is advisable to use hardwood. Such furniture is reliable, massive with a huge number of design options.

Vine and rattan

A distinctive feature of this material is its openwork and lightness. An alternative to expensive natural rattan is an artificial material for weaving. It is not inferior in strength to natural rattan, moreover, it is moisture resistant. Weaving a rocking chair with your own hands is not an easy, but exciting business.

Metal

Heavy and plastic material. Forged products look chic, however, have considerable weight. Therefore, metal products should preferably be placed on concrete, asphalt or stone floors.

Important! Metal skids fall into the soil, and leave traces on a wooden surface.

Plastic

Models made of plastic, resistant to sunlight and precipitation, have a modern design. It is important that the cost of this material is quite acceptable. Do-it-yourself rocking chair made of plastic pipes is, without exaggeration, a construction for centuries.

to contents ↑

How to make a rocking chair - information for the home master

A rocking chair can be bought, but you can make it yourself. A little time of desire and the ability to work with tools is all that is needed for such work. It is not at all difficult to get raw materials for the manufacture of garden furniture.

Wood and plywood

This is the most affordable option. To make a rocking chair with your own hands made of wood, drawings and sizes can be taken on the Internet. There are also various design ideas.

For work, you will need the tools available in the arsenal of any home craftsman. So you will need:

• Screwdriver.
• Electric jigsaw.
• Drills and screws with different diameters.
• Sandpaper of varying degrees of graininess to process finished parts.

The easiest way is to give a second life to the old chair.The restoration of the rocking chair with your own hands is done according to this algorithm: shorten the legs and fix the structure on the skids made of solid wood.

Important! To make the product look beautiful and original, you can sew a cover for it or braid it with ribbons of leather or plastic material.

• More beautiful and original products are obtained from plywood 1.5 cm thick: First, draw life-size patterns, and cut out the side parts of the product.
• After the side parts are cut, work on the edges and connect the parts with 3x5x60 cm bars.
• Lay out the top with plywood slats or planks 1x5x60 cm.
• Fix them to the end part with self-tapping screws.

Important! To prevent plywood from cracking or delaminating, pre-drill it at the point of attachment using a small diameter drill. Also make recesses in the slats to drown the caps of the screws.

• So that the hats from the hardware are not noticeable, they can be puttied or masked with stubs imitating wood.
• Further, the finished product can be varnished or painted.

Metal rocking chair - drawings and dimensions

The material is beautiful, practical, fraught with a lot of possibilities, but quite difficult to process. If you do not own the technology of cold bending or forging, you can perform the simplest models. However, from this they do not become less interesting.

So, do-it-yourself rocking chair from a profile pipe:

• The first stage of work is the manufacture of a frame from a pipe, metal profile or corner. An obligatory moment is the coloring of the metal with an anti-corrosion compound.

Important! Hammer paint for metal looks especially beautiful. The hammer effect creates the appearance of painstaking handwork.

• The seat can be made soft, woven from the luggage belt, or typed from wooden planks.
• You can decorate the product with soft decorative pillows.

Important! Metal products braided by a vine look good, although metal itself is very beautiful.

to contents ↑

Stock footage

As for design solutions, there are many of them. This can be a classic-style product, a wide bench or a “double chair” for relaxing in a pleasant company, or a children's rocking chair with their own hands, painted in different colors. Show your imagination, add your own unique touches to standard drawings, and then the pleasure of new furniture will be even more, because you will receive moral satisfaction from the work done by your own hands!