How to remove the iron from the iron at home?

It is impossible to imagine the life of a modern person without an iron. This item is in almost every home. However, sooner or later pollution will appear on its sole, which can ruin things when ironing. Since the problem is urgent, a large number of methods were found by experiment, how to remove the iron from the iron at home. We will consider them now.

to contents ↑

Types of soles

Before choosing one of the methods, you need to figure out what kind of sole your ironing device has. What kind of pollution also plays an important role.

Enamel

An enamelled soleplate glides over quite easily when ironed. The enameled surface is the easiest to clean.

Steel and aluminum

In most cases, the coating is made of stainless steel, aluminum or their alloy. Such popularity is due to the high thermal conductivity of these metals. True, this type of sole has a minus - sometimes the fabric can stick.

Titanium

A titanium coating consumes much more energy when ironing, since this material has less thermal conductivity. The biggest plus of the titanic sole in its long service life - scratches and damage are not terrible.

Sapphire

Sapphire sole (made of abrasive chips) is very similar to the titanic in characteristics. It also suffers scratches, chips and other damage. That is why when cleaning, you can safely use even a metal brush.

Teflon and Ceramics

Ceramic or Teflon sole is quite fragile, it can easily get severe damage. That is why special care must be taken when handling it.

Important! These materials are not the best when choosing an ironing device, if you suffer from forgetfulness or inattention.

The most important thing you need to know when using a ceramic or teflon iron is that it is forbidden to use abrasive products or metal brushes when cleaning, as they scratch the surface severely. To clean this type of sole, it is necessary to dissolve the dirt, and then remove it with a foam sponge or cloth from a soft material.

to contents ↑

How to remove dirt?

Mostly contaminants on the iron are in the form of soot, burnt matter or plaque. It is necessary to clean them as soon as possible without delaying the situation. So the process of purification will be much simpler and more efficient. Next, you need to choose one of the methods below.

Acetone

The first way to clean the surface of the iron from the burn is to use a nail polish remover, which every girl will probably find. Use a cotton pad or a small piece of cloth to handle the sole of the iron. Once the result is achieved, wash it with warm water and soap.

Spatula and clean rag

If matter burns to the iron, it is necessary to start cleaning it as soon as possible. And a wooden or plastic spatula and a cotton fabric will help you with this. To do this, heat the ironing machine to the maximum temperature and scrape off the soot with a spatula, then remove it with a cotton cloth.

Baking soda

One of the most effective and efficient methods is baking soda. Having mastered this method, you will never again be wondering how to clean the iron from a stick on the sole at home.

In fact, there is nothing complicated:

1. Mix soda with a little warm water.
2. Rub the gruel on the area of ​​dirt until they finally disappear.

Important! This method is not suitable for cleaning surfaces prone to scratches and other damage.

Laundry soap

Laundry soap - a universal tool for cleaning various stains, including on the sole of the iron:

1. Moisten it with water and soap thoroughly.
2. After - you need to heat the ironing device as much as possible.
3. Turn it off and wait for the soap layer to cool.
4. As soon as this happens, the soap should go off very easily along with the dirt.

Special tool

As an option - you can purchase a special tool. In industrial stores, various options are available for sale. One of them is a pencil for cleaning the iron.

All that needs to be done is to spread the surface with a pencil and heat it as much as possible. Once the iron has cooled, all impurities will be very easy to remove.

How to remove carbon deposits from an iron with vinegar?

In order to clean your ironing device of scale and other dirt, you can use vinegar. It is used to cleanse many types of contaminants.

Wash the sole with vinegar and leave for several hours, then rinse with soap and water.

Important! For greater effectiveness can be added to vinegar ammonia.

Matches

Matches are the best way to clean your iron from a burnout. They are guaranteed to be in your home. In order to use this method, it is necessary to heat the iron and rub its sole with the sides of the matchbox (where sulfur is present).

Important! This is one of the fastest ways. In about 15 minutes there will be no trace of dirt.

How to clean the iron with toothpaste?

One of the safest methods is with toothpaste. It is perfect for cleaning ceramic or teflon surfaces.

Put the paste on the iron and heat it, then let it cool - removing the dirt is not difficult.

Important! Use only pure white toothpaste, without abrasive, colored granules.

to contents ↑

Stock footage

Are you convinced that there are no difficulties with cleaning the sole of the iron, and even the most unexpected means are suitable for this? Now act and continue to be more careful when ironing, especially synthetic, woolen and any other fabrics prone to melting.