How to clean a water pipe at home?

How many problems exist in the use of plumbing, then it broke down, then the water pipe system is clogged, all these problems are simply a head spin, but there is nothing to be done, they need to be solved. Without water from the tap in the bathroom or in the kitchen in any way. In this article, we will talk about how to clean a water pipe at home, and also give some simple tips to prevent clogging.

to contents ↑

Causes of pipe clogging

Most often, the water pressure is reduced due to deposits on the walls of your pipeline. Moreover, even if it is made of plastic components, they are still connected to the pipes of the risers, which are made of metal. It is in this area and look for the cause of clogging of the pipe.

Important! A huge amount of rust, which is in the form of layers, has a habit of falling off old pipes, the flow of water evenly carries it along the entire length of your water supply.

Useful advice

Despite the fact that removing deposits and rust from the walls of the water pipe is a rather tedious procedure, in no case do not put it off even if there is even the slightest suspicion. Thus, you will not only be able to ensure the safe use of the water supply system, you will also forget about the problems of low pressure for about 10-15 years.

Important! Also, pipes can become clogged with sand or other impurities. The reason for this is that over time, the surface of these pipes becomes more rough.

to contents ↑

Where does rust accumulate?

Rust, as well as other deposits, accumulate in both plastic pipes and metal. Before cleaning the water pipe at home, localize the clogging area. Thus, you can avoid additional difficulties when performing cleaning. In addition to the inner wall of the pipe, a blockage is formed, as a rule:

• in places of cranes, as well as valves;
• on filters;
• in the place where the hot and cold water meters are installed.

Important! Small pressure, at best, can cause clogging of the mesh obstacle that is in front of the washing machine, column, counter or mixer filter. In the event that their dismantling along with subsequent washing with water could not help, the conclusion is clear - the pipeline is clogged.

Method selection

To date, several methods for cleaning water pipes are available. The specific choice of one method depends on the functional state of all these elements of the water supply system, their progress, as well as location. For example:

1. To clean the water pipe from rust from deposits in houses of an old construction is not the best solution. Blockages in them, as a rule, are in huge numbers. In this case, give preference to that option in order to replace pipes with propylene or metal-plastic ones.
2. If special filters are installed in the pipeline, clean them first.
3. If only one section turned out to be problematic, cleaning the water pipe from rust can be done using one of the following methods.

to contents ↑

How to clean the water pipe at home?

If you are sure that the blockage is not very large and you can clean the water pipe at home, then use one of the following methods - from the simplest to the most complex.

Tapping with an ordinary hammer

To do this, dismantle the strainer, fully open the cold water tap, and then gently tap the pipe along its entire length. A rapid and strong stream of water will remove all rust peeling off from the walls. This method is the simplest. It can be used without the help of professionals.

Cable

The above method, unfortunately, does not always help. But you can still use another, more time-consuming, to clean the water pipe at home. To do this, you need a small diameter cable:

1. Block the passage of water to the area to be cleaned, dismantle the mixer.
2. After that, insert the cable into the hole that has formed.
3. Eliminate chipped pieces of rust at the final stage by abundant flushing of the pipe.

Dry cleaning of water pipes at home.

This method is used only when it is not possible to replace the water supply, and a large number of blockages formed in it. For these purposes, you can use a tool called “Mole”:

1. Pour the chemical liquid into the system and leave for a certain amount of time - the period of exposure to the chemistry is indicated on the packaging with the manufacturer’s product.
2. In the future, simply flush the plumbing system with a huge amount of water.

Difficult option

If all of the above methods could not help you, there is the most laborious way of how to clean the water pipe from various deposits with your own hands.

This method involves the dismantling of the clogged area:

1. After you shut off the water supply system, do this at the maximum distance from the mixer.
2. Once you have dismantled the pipe, connect the hose to it and let the water run under high pressure.
3. Water with its pressure will knock out the blockage, thereby cleaning the section of the water supply.

Important! Using this method is not always successful. A complete replacement of the problem area may be required.

Useful advice

The use of chemicals to remove deposits, rust from the water pipe system requires the observance of certain precautions. All this is due to the fact that contact with the Mole chemical agent on an exposed area of ​​the skin can cause a rather severe chemical burn. For this reason carry out this work in protective gloves.

to contents ↑

Prevent clogging of water pipes - what should be done?

The most important protection is the primary filter. But as a rule, it is simply called a coarse filter. Structurally, it is made in the form of a conventional grid, which traps large pieces of rust. There may be several similar devices in the water supply system.

In apartments of modern high-rise buildings, the filter is placed in front of the counter, and its location is served by a special flange together with a cork, by unscrewing which you can remove a cylindrical mesh from the channel. Do not be surprised if this mesh is clogged with deposits so firmly that in order to clean the part, you need a nail or a screwdriver.

Important! This mesh is specially made of stainless steel. That is why she herself is not capable of a corrosion process. But rust is growing on it quite tightly, while clogging the hole.

In addition to installing a filter, the following preventative measures can be taken:

• At least once a week, pour a couple of liters of hot water into the drain hole, you can boil water.
• Perform preventive cleaning every month with folk remedies - citric acid, vinegar, soda.

to contents ↑

Stock footage

That's all, the problem is solved, we hope you were satisfied with the result of the measures taken after reading this article.Now you can not only eliminate the blockage, but also make it form as rarely as possible.