How to lubricate door hinges so that they do not creak?

The creaking doors annoy and irritate anyone, and owners of even the most elite models can face this phenomenon. There are a lot of reasons that suddenly cause the appearance of excess sounds when opening and closing the wings. Therefore, in order to rectify the situation, you must first understand what it is coming from and then decide what to lubricate the door hinges to prevent creaking. You will learn various solutions to this problem from this article.

to contents ↑

What doors can creak?

It is believed that modern PVC models will never creak. But this is not so. Equally often such problems arise both in plastic and in wooden or metal structures. It all depends not only on the base material, but also on the correctness of the installation, as well as on the intensity of operation.

to contents ↑

Why did the doors begin to creak?

Before you lubricate the hinges of interior doors or entrance structures, you need to understand what the problem is.

Goosebump rattle of door leaves can form for the following reasons:

1. During installation, poor-quality fittings were used, which quickly underwent wear. In such a situation, you are unlikely to have to bother with the question of how to lubricate the door. Most likely it will just be necessary to replace the broken elements.
2. Lack of lubricant. When installed, new hinges have a certain amount of lubricant. Over time, it may thicken or spread out - it depends on the consistency, quality. As a result, there is excess friction when the leaves move, the door creaks, you are puzzled by the question of what can be done. In this situation, it is enough to choose the optimal type of lubricant, apply it correctly - the problem will be solved. This must be done, because in the absence of the necessary easy movement and sliding, the accessories quickly undergo wear and break.
3. Rust. This problem is most often sinned by metal products, although wooden models can also be installed on iron loops without a protective PVC layer. If corrosion is still at the initial stage, you can simply lubricate the hinges, if rust thoroughly damaged the hardware material - it is necessary to replace it.
4. Garbage. Depending on where the door is located, it may be more or less prone to clogging. For example, often in the hinges of entrance or attic doors dust and abrasive particles can get stuck and soak into the lubricant. They grind metal, which causes a characteristic creak of the door.
5. Skew Sash distortion may occur due to deformation of the door leaf or due to improperly adjusted position during installation. If the problem is precisely this, it will not be enough just to find a means than to lubricate the door hinges, additional measures will be required to restore the shape and dimensions of the door leaf and door frame.

to contents ↑

How to remove a creak?

If you notice that a rattle has appeared and would like to find an option as soon as possible than to grease the loops so that they do not creak, take the following methods into your arsenal. One of these tools will definitely be at your fingertips at any time:

1. Waste engine oil is an easy way to solve the problem than to lubricate the door so that it does not creak if you have a car.
2. Oil for sewing machines - this option is suitable for needlewomen who have this technique and they often use it.
3. Ordinary vegetable oil - will help eliminate the problem, but only for a short time, so it can be used as an emergency measure. Further - you still have to apply a more effective tool.
4. A pencil lead is the simplest thing you can do if an interior door creaks. Insert the lead directly on the hinges and change the position of the sash several times so that it splits and spreads through the hinges, or first make shavings and apply it to the fittings.

If you decide to thoroughly approach the solution of such a problem and act on a long-term result, get out of the house to any hardware store and buy one of the following means. Lubricate the door so that it does not creak, you can:

• WD 40 is an effective tool, after processing which is solved not only the problem of easy sliding of accessories, but also metal corrosion. WD 40 dissolves rust and forms a protective film on the surface.
• “Litol” - this tool is suitable even if you are looking for something to grease the front door so that it does not creak. Such a lubricant has the property of frost resistance, so it is freely used in open spaces, even for hinges of gates and gates.
• “Solidol” is a rather viscous oil-based mass. A big plus of using this particular tool is that it is very cheap, which is why it is popular for processing any metal mechanisms.
• “Tsiatim” is a universal remedy designed not only to eliminate squeaking, but also to protect against corrosion, aggressive chemistry.

to contents ↑

Helpful hints:

1. To make it more convenient to process the hinges, open the door well before opening access to the working surface of the hardware. Additionally, you can insert a wedge into the opening to prevent closing of the sash and damage to the fingers.
2. If you need to adjust the position of the door leaf, use special adjusting tools for this. Usually they come in a set with an acquired interior door.
3. So that you can quickly and easily apply the selected lubricant in the right amount, use a syringe or a special oiler with a nozzle. If these devices are not at hand - take a regular cotton swab or a paint brush of a suitable size.
4. More funds can be applied to the upper part of the hinges, since it is it that is working and is more susceptible to wear.
5. If you notice that the grease is spreading on the door, remove the excess with a dry, clean cloth or rag.

to contents ↑

Stock footage

Now you know all the causes of the rattle of doors and can easily solve this problem with your own hands. We hope you have succeeded and you enjoy the comfort and peace in your home without any unpleasant sounds.