Samsung washing machine assembly

A washing machine is one of the most needed home appliances. Any, even minor, malfunction entails a huge number of problems. Some failures require the intervention of a professional, but many malfunctions can be fixed on their own. Dismantling and assembling the Samsung washing machine is an important point in every repair. This article is a kind of guide for a home master who decided to do the repair on his own. Detailed instructions will allow you to do this without any problems.

to contents ↑

Main nodes

Dismantling the unit largely depends on its type and brand. However, the standard components of the washers, regardless of the brand, are the same. So, here are the main components of the unit:

• Panels: back, front, top, socle.
• Tray for liquid or powder detergent.
• Programmer Panel - for automated models or “semi-automatic machines”.
• Drum with reservoir and clutch system.
• Weights for the tank.
• Motor.
• Pump.
• Shock absorbers.
• Pressostat.
• Heating element.

Important! If disassembling is more or less clear, then the question: how to assemble a washing machine “Samsung”, “Indesit” or LG, worries many home masters. There is only one answer: assembly must be carried out in the reverse order of the dismantling process. Do not rely on your own memory? Record each process in detail or take pictures. In this case, the installation of the unit is much simpler.

The disassembly algorithm depends on the method of loading the laundry - vertical or frontal. Therefore, before proceeding with the repair, carefully read the instructions for the device, and be sure to read the article onwarranty repair of washing machines. 

Tools for work

Pick up and prepare the inventory that is useful to you at work. Be sure to disconnect the machine from the power supply. When working you need such tools:

• Set of wrenches at 8,9.19.
• Flat and Phillips screwdrivers.
• Nippers, ticks.
• Pliers are regular and long.
• Service hook.

Important! When disassembling the washer, keep in mind that most of the components of the unit are made of plastic. Therefore, disassemble the device with extreme care so as not to damage fragile parts.

to contents ↑

Front loading

Dismantling a washing machine with a front-loading type of laundry has its own specifics. There are also nuances for individual brands of units. However, there are general principles:

1. Remove the top panel. Using a Phillips screwdriver, remove the fasteners and carefully remove the cover.
2. Release the notch for the detergent and bleach. Press the area in the center of the tray. The capacity is removed without the slightest problem.
3. Remove the control unit. Remove the screws in the upper compartment of the front panel. Unscrew the block 90 degrees and remove it from the mount. Using the service hook, fasten the panel to the side of the washing machine.
4. Disconnect the wire connectors by removing them from the slots of the control unit.
5. Remove the service panel located at the bottom of the front of the unit.
6. Separate the rubber cuff from the center panel. To separate the cuff without problems, first dismantle the clamp.
7. The next step behind the cuff separation is the removal of the balances. The counterweights in different modifications of the washers can be located in front or behind. Outwardly, they resemble concrete blocks.They are designed so that the appliance does not vibrate too much during washing and spinning. Counterweights are fixed on long bolts that need to be untwisted.
8. Remove the heating element. In many models, the heater heater is located at the rear of the unit. A locking nut is located in the center. Unroll her. Now push the pin inward. Helping yourself with a screwdriver, carefully remove the heater.
9. Remove the drive belt stretched from the motor to the pulley. The latter is sealed to the tank. Also, remove all wires that go to the motor and tank.
10. Remove the elements securing the tank and remove it.
11. Remove the center panel by loosening the four fastening screws.
12. Disconnect the sunroof lock connector.
13. If necessary, remove the rear panel. To do this, unscrew the fixing screws.

A few words about how to assemble a washing machine. Each of the elements must be installed strictly in its place during reverse installation, otherwise the device will simply not function.

to contents ↑

Vertical loading

The Zanussi company, like many others, produces many modifications with vertical loading. The most common problems for verticals are:

• Drum imbalance during washing.
• Spontaneous opening of the drum.
• Corrosion of the metal base.

However, the most frequent DIY repair of the Samsung washing machine is the replacement of the bearing. To complete it, consider these tips.

The first moment of disassembly is the dismantling of the control panel:

1. Loosen the fixing screws located on the side.
2. Slide the unit toward you.
3. Disconnect the wires.
4. Remove the panel.

The further dismantling procedure is largely reminiscent of the process associated with the dismantling of front models:

1. Using a screwdriver, remove the clamp and release the drum.
2. Remove the plastic cover covering the tank. Handle this item with extreme care so as not to break.

Next, carefully knock out the bearings and put in their place new components.

After the device is assembled, be sure to readwashing machine installation rules. 

to contents ↑

Stock footage

Remember, or better yet, photograph the arrangement of wires and parts so that there are no problems during assembly. Incorrect installation can lead to a short circuit and a complete malfunction of the device.