Install a gas stove
Every housewife knows that it is impossible to imagine a kitchen without a stove, especially without a gas stove, because this is the most popular and convenient option for cooking. However, a gas stove is one of the most dangerous appliances in household appliances. This is due to its direct connection to the gas supply. Therefore, the installation of such a unit must be carried out in accordance with the manufacturer's recommendations and in accordance with all safety rules. But if you know how to hold a wrench in your hands, this procedure will not be difficult for you, and it will not take so much time. Well, in turn, we will tell you how to install a gas stove correctly.
to contents ↑Who has the right to install a gas stove?
Despite the fact that the installation procedure is simple and can be done by absolutely any resident of an apartment or house, without any experience it is strictly forbidden to do this. This is due to the fact that gas equipment is a direct source of increased danger.
Important! If you still decide on an independent installation and do it with errors, the less that you will face in this case is a fine from the organization that checks the correct installation of gas equipment. This is due to the fact that the brand and model of the installed gas stove are registered in the documentation. Therefore, coordinate all your actions with them in advance.
Only organizations that have received a special license to conduct this type of activity are entitled to connect household gas stoves to the general gas supply. Therefore, after acquiring a gas stove, you have several ways to connect this item of household appliances in your home:
- Related store services. After acquiring gas stoves, many large home appliance stores provide services such as connecting gas stoves at home.
Important! Please note that the store can connect to the gas pipeline for free or for an additional fee.
- Special organizations. You can look in the technical passport of the unit you purchased for a list of organizations that have the right to connect gas equipment to the gas pipeline.
Important! After the gas stove has been replaced, it is best to call the gas service, which will check the installation, make its corrections and correct the information in the documentation.
- Calling a gas appliance maintenance wizard on your site is a less costly option. The wizard will not only connect it to you, but will immediately add all the necessary information to the documentation.
Important! The only negative of this method is that you have to adapt to the schedule.
However, you should also be thoroughly aware of the entire connection process. This is necessary so that you can correctly choose and prepare a place for a gas stove, as well as purchase all the necessary components. In addition, unfortunately, very often hired specialists, who, although they have the right to carry out such work, are not always competent. Therefore, you must clearly monitor all work and, in case of errors, correct them.
to contents ↑Important! Simultaneously with the installation of the gas stove, it is necessary to install auxiliary equipment that will make cooking pleasant and will allow you to maintain a comfortable microclimate in the apartment. To do this, find out:
How to connect a gas stove in the apartment yourself?
Before proceeding with the installation of a gas stove, you must remove the old one. The algorithm of actions is as follows:
- Turn off the gas tap. Check if gas has stopped flowing.To do this, simply try to light one of the burners.
- Unscrew the lock nut from the pipe lowering. If it was screwed to a flexible pipe, you will have no problems with dismantling. If the locknut was installed a long time ago and, as often happens, is covered with paint, you will have a hard time. A grinder will come to your aid here - just cut the lock nut a little lower than the tap. Another option is to try unscrewing it with a wrench.
- Move the old stove away from the wall. Unscrew the squeegee with the key of the right size directly from the device itself.
Important! If there is a fairly long period of time between dismantling the old and installing a new gas stove, it is best to place plugs instead of the drive.
Site preparation
If you plan to install the stove in the old place, you do not need to take any preparation steps. Well, in the case of a new location of the device, it is necessary to take care of several nuances in advance:
- When choosing a new place, pay attention to the fact that the distance from the gas pipe should not be more than four meters. The most optimal is a distance of two meters.
- Install grounding on the wall outlet. This is due to the fact that most modern devices are equipped with a backlight or electric ignition.
- The connection to the gas pipeline is best done using a flexible hose, which must be at least 10 millimeters in diameter. This is necessary in order for the gas to flow unhindered.
Gas stove connection
The gas stove is connected according to the following sequence of actions:
- Unpack the new appliance. You can leave only a protective film that protects the panel during installation from possible contamination and damage.
- Replace the device, leaving a gap recommended by the manufacturer between it and the wall.
- Check the horizontal surface of the work surface. This must be done using the level.
Important! The horizontal surface of the working surface can be adjusted using the legs of the plate. If this is unsuccessful, an even plane will need to be placed under the legs or the device as a whole.
- On the threaded connection between the gas pipeline and the flexible hose, wind the seal.
- Connect the hose to the lowering with a wrench.
- Install the gasket to the appliance and connect the hose.
After you have installed the gas stove, you need to check it. An ordinary soap solution will come to your aid. To do this, coat them with joints and open the tap. If there are no soap bubbles, this means that you did everything correctly and you can safely use the device. Otherwise, the work will have to be started anew.
to contents ↑Important! Experienced experts recommend additionally installing a dielectric insert. It prevents the transmission of current through the gas riser from an ungrounded device, which subsequently can lead to damage to the gas stove itself. It is best to install a dielectric insert between the flexible hose and the tap.
How to connect a gas stove to a cylinder?
Despite the fact that central gas supply has long been installed in most private houses and apartments, the use of cylinders is still common, especially in small towns. In order to properly connect the device to the cylinder, you need to take into account some nuances during the process:
- The distance from the gas stove to the cylinder should be at least 1.5 meters.
Important! The ideal option is to place the gas cylinder in another, and preferably non-residential premises in a special metal box.
- Provide a good extractor hood indoors. Ventilation must be of good quality.
- Due to the fact that the gas in the cylinders has a pressure higher than that supplied from the gas pipeline, it is advisable to use a reduction gear. Most often, it comes with a cylinder.
Important! You might also find our tips useful. how to arrange furniture in the kitchen.
The procedure for connecting a gas stove to a cylinder is quite easy, everyone can cope with it without the involvement of specialists and various organizations. You can do this as follows:
- Connect the gas hose to the stove. In this case, tightness will be ensured by a wound seal.
- Connect the other end of the hose directly to the gearbox.
- Use a soapy solution to check for gas leaks.
- Turn on the hotplate. If the flame burns evenly, has bluish flashes and without soot, it means that you did everything right.
to contents ↑Important! In terms of financial benefits and savings on utility bills, see also information on which gas meter to choose for the apartment.
Stock footage
Gas stove installation - Although this is a simple task, it is very dangerous, since improper connection to the gas pipeline can cost the health and life of your and your loved ones. Therefore, if you do not have experience or you doubt your abilities, it is better to contact special organizations, and with the help of our tips you can check the correctness and reliability of the work they performed.
(No ratings yet)
Loading...
